带锯的切割台_SOLIDWORKS 2010_模型图纸下载

首页

图库

工程师

带锯的切割台（ID:239507）

设备部件 / 工器具 / 带锯的切割台

©非原创

平面图

3D视图

文件列表

#	文件名称	文件大小
1	Abdeckplatte_zu_Welle_unten_neu.sldprt	51.00K
2	Bandsaege.stp	14.28M
3	curved spring lock washer_din_Spring washer DIN 128 - A12.sldprt	57.50K
4	DIN_923_M8x10.sldprt	75.00K
5	Distanzring.sldprt	51.00K
6	Distanzring_zu_Welle_oben_neu.sldprt	51.50K
7	Distanzring_zu_Welle_unten_neu.sldprt	50.50K
8	domed cap nut_din_DIN 1587 - M12 --NUC.sldprt	63.50K
9	Feder_01.sldprt	233.00K
10	Frontabdeckung.sldprt	78.50K
11	Grundkoerper_obere_Fuehrung.sldprt	90.00K
12	Grundkoerper_Saege.sldprt	101.00K
13	Grundkoerper_untere_Fuehrung_02.sldprt	67.50K
14	Halter_zu_Stellvorrichtung.sldprt	57.50K
15	hex nut style 2 gradeab_din_Hexagon Nut ISO 4033 - M16 - W - N.sldprt	61.00K
16	hex nut with 1.5d height-2_din_DIN 6330-B-M10-N.sldprt	59.00K
17	hex nut with 1.5d height-2_din_DIN 6330-B-M12-N.sldprt	59.00K
18	hex screw gradec_din_ISO 4018 - M10 x 20-WS.sldprt	69.00K
19	hex screw gradec_din_ISO 4018 - M10 x 25-WS.sldprt	70.50K
20	hex screw gradec_din_ISO 4018 - M10 x 40-WS.sldprt	76.50K
21	hex screw gradec_din_ISO 4018 - M12 x 30-WS.sldprt	71.00K
22	hex screw gradec_din_ISO 4018 - M6 x 12-NS.sldprt	65.50K
23	hex screw gradec_din_ISO 4018 - M6 x 20-NS.sldprt	70.50K
24	hex screw gradec_din_ISO 4018 - M8 x 16-WS.sldprt	68.00K
25	hex thin nut chamfered gradeab_din_Hexagon Thin Nut ISO 4035 - M10 - N.sldprt	61.50K
26	Keilriemenscheibe_zu_Welle_unten.sldprt	52.50K
27	knurled thumb screw_din_DIN 464 - M8 x 20 - -St --- 20SD.sldprt	200.50K
28	Laufrad_oben_neu.sldprt	128.50K
29	Laufrad_unten.sldprt	131.00K
30	plain washer hardened grade a_din_Washer DIN 125 - A 10.5 - 300HV.sldprt	51.00K
31	Platte_1_zu_Welle_oben_neu.sldprt	51.00K
32	Platte_2_zu_Welle_oben_neu.sldprt	50.50K
33	radial ball bearing_68_din_DIN 625 - 16004 - 12,DE,AC,12_68.sldprt	129.50K
34	radial ball bearing_68_din_DIN 625 - 6204 - 10,DE,AC,10_68.sldprt	120.00K
35	radial ball bearing_68_din_DIN 625 - 624 - 8,DE,AC,8_68.sldprt	105.50K
36	radial ball bearing_68_skf_SKF - 6000 - 8,DE,AC,8_68.sldprt	105.50K
37	Ringschraube_zu Stellvorrichtung.sldprt	130.00K
38	Rollenhalter_Saegebandfuehrung_oben_2.sldprt	61.00K
39	Saegeband.sldprt	78.00K
40	Scheibe_obere_Fuehrung.sldprt	51.50K
41	Scheibe_zu_Feststeller.sldprt	50.00K
42	Scheibe_zu_Welle_unten_neu.sldprt	50.00K
43	Schraube_zu_Welle_oben_neu.sldprt	56.00K
44	Schraube_zu_Welle_unten_neu.sldprt	55.50K
45	slotted countersunk flat head screw_din_ISO 2009 - M6 x 25 --- 25S.sldprt	68.50K
46	slotted csk tapping 7972_din_Tapping screw DIN 7972-ST3.sldprt	61.50K
47	socket set screw dog point_din_DIN 915 - M5 x 8-N.sldprt	55.00K
48	Spannschraube_cronos.sldprt	160.50K
49	spring pin slotted_hd_din_Spring Pin ISO 8752 - 3 x 40 - St.sldprt	53.00K
50	Stehbolzen_obere_Fuehrung.sldprt	50.50K
51	Tellerfeder_DIN 2093_Febrotec_0S4295.sldprt	51.00K
52	Teller_obere_Fuehrung.sldprt	51.00K
53	Tischeinsatz.sldprt	55.00K
54	Tischplatte.sldprt	74.50K
55	UBG_obere_Saegebandfuehrung.sldasm	65.50K
56	UBG_Rollenhalter.sldasm	51.50K
57	UBG_untere_Saegebandfuehrung_02.sldasm	56.00K
58	UBG_Welle_oben.sldasm	56.00K
59	UBG_Welle_unten.sldasm	64.00K
60	Wellenkoerper_zu_Welle_unten_neu.sldprt	59.00K
61	重复_Welle_oben_neu.sldprt	57.00K
62	重复_Welle_unten_neu.sldprt	56.50K
63	ZBG_Cronos_Bandsaege214.sldasm	39.50K
64	带锯的切割台（创意）设计模型.SLDASM	5.62M