机器人臂端加工设计模型_SOLIDWORKS 2010_模型图纸下载

首页

图库

工程师

机器人臂端加工设计模型（ID:324076）

机械设备 / 智能装置 / 机器人臂端加工设计模型

©非原创

平面图

3D视图

文件列表

#	文件名称	文件大小
1	16622786466254.zip	7.21M
2	7150K180.sldprt	192.50K
3	92373A301.sldprt	58.00K
4	99437A140.sldprt	420.50K
5	Ball.sldprt	48.50K
6	Bearing Plate Bottom.sldprt	100.00K
7	Bearing Plate Top.sldprt	93.50K
8	BODY_GRM2TS-2-22SDS-00SDS-LAA-B08-P1E00-TA017-TB017-OPEN.sldprt	338.00K
9	Braket 1 for Heat Sheiled bottom.sldprt	70.00K
10	Braket 2 for Heat Sheiled top.sldprt	68.00K
11	Cap Plate.sldprt	89.50K
12	EOA Heat Shield Bottom.sldprt	83.00K
13	EOA Heat Shield Top.sldprt	71.00K
14	GRM2-2-P1A00.sldprt	262.00K
15	GRM_STOPBLOCK_63962-03.sldprt	137.50K
16	Hand2.sldprt	122.00K
17	Heat Box Bottom.sldprt	155.50K
18	Heat Box Top.sldprt	82.50K
19	JAW_STD_FIXED_GRM2.sldprt	144.00K
20	JAW_STD_ROT_GRM2.sldprt	171.50K
21	Little ball.sldprt	48.50K
22	Lomg Gusset.sldprt	67.00K
23	pan cross head_am_B18.6.7M - M4 x 0.7 x 5 Type I Cross Recessed PHMS --5C.sldprt	75.50K
24	Part 11111.sldprt	179.50K
25	Part 22222.sldprt	156.00K
26	Part 33333.sldprt	176.00K
27	PN59104-033_SHCSM6x1x16.sldprt	62.50K
28	PN59104-118_SHCSM6x1x20.sldprt	114.00K
29	PN62178-003_IMP_FITTING.sldprt	99.50K
30	Robot End of Arm Tooling 8.IGS	18.77M
31	Robot End of Arm Tooling 8.rpt	2.99K
32	Round Tubing5.sldprt	89.50K
33	SDS_GRM2.sldprt	219.50K
34	sealing cap for heat box.sldprt	71.00K
35	socket button head cap screw_am_B18.3.4M - 5 x 0.8 x 20 SBHCS --C.sldprt	77.00K
36	socket button head cap screw_am_B18.3.4M - 5 x 0.8 x 8 SBHCS --C.sldprt	76.50K
37	socket head cap screw_am_B18.3.1M - 6 x 1.0 x 30 Hex SHCS -- 30CHX.sldprt	77.50K
38	socket head cap screw_am_B18.3.1M - 6 x 1.0 x 50 Hex SHCS -- 24CHX.sldprt	77.50K
39	socket head cap screw_am_B18.3.1M - 6 x 1.0 x 60 Hex SHCS -- 24CHX.sldprt	77.00K
40	socket head cap screw_am_B18.3.1M - 8 x 1.25 x 25 Hex SHCS -- 25CHX.sldprt	73.50K
41	socket set screw cup point_ai_SSCUPSKT 0.3125-24x0.8125-HX-C.sldprt	61.50K
42	Spacer.sldprt	87.50K
43	special screw.sldprt	66.50K
44	机器人臂端加工设计模型.SLDASM	2.91M
45	机器人臂端加工设计模型.x_t	3.66M