登录注册
微信扫码登录
工业燃烧器（ID:325490）
1.png)
2.png)
3.png)
0.png)
4.png)
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 16623898104367.zip | 72.01M |
| 2 | 20210325_143954.jpg | 2.53M |
| 3 | 5x10x1000.prt.1 | 67.36K |
| 4 | 5x10x2500.prt.1 | 66.16K |
| 5 | 5x10x800.prt.1 | 69.69K |
| 6 | air_plenum_holder.prt.1 | 109.86K |
| 7 | air_plenum_holder_2.prt.1 | 97.37K |
| 8 | air_plower.asm.1 | 80.74K |
| 9 | assem_new_pent_house.asm.1 | 92.13K |
| 10 | ast_bearings_ucp206.asm.1 | 58.79K |
| 11 | axe.prt.1 | 58.81K |
| 12 | back_u.prt.1 | 320.86K |
| 13 | base_panel_1.prt.1 | 333.86K |
| 14 | base_panel_2.prt.1 | 132.53K |
| 15 | base__panel_assem.asm.1 | 54.13K |
| 16 | bearing_u.prt.1 | 145.95K |
| 17 | belt_part2.prt.1 | 79.86K |
| 18 | belt_part3.prt.1 | 63.37K |
| 19 | belt_support_1.prt.1 | 105.82K |
| 20 | blower_belt.prt.1 | 62.04K |
| 21 | blower_holder_support.prt.1 | 54.53K |
| 22 | blower_isolation.prt.1 | 77.07K |
| 23 | burner_base_to_chassy.prt.1 | 62.06K |
| 24 | burner_base_to_chassy_2.prt.1 | 54.44K |
| 25 | burner_blower_isolation_2.prt.1 | 78.89K |
| 26 | burner_duct_isolation_2.prt.1 | 79.58K |
| 27 | burner_in_cover_default.prt.1 | 112.71K |
| 28 | burner_in_support.prt.1 | 256.57K |
| 29 | burner_isolation_part2.prt.1 | 76.70K |
| 30 | burner_out_cover_default.prt.1 | 90.57K |
| 31 | burner_panel_1_default.prt.1 | 188.48K |
| 32 | burner_panel_2_default.prt.1 | 196.83K |
| 33 | burner_panel_in1_default.prt.1 | 238.72K |
| 34 | burner_panel_in_side_1_default.prt.1 | 84.16K |
| 35 | burner_panel_in_side_2_default.prt.1 | 235.11K |
| 36 | burner_panel_out1_default.prt.1 | 136.54K |
| 37 | burner_panel_out2_default.prt.1 | 158.06K |
| 38 | cut-extrude2_2_.prt.1 | 60.36K |
| 39 | cut-extrude2_3_.prt.1 | 62.05K |
| 40 | cut-extrude2_4_.prt.1 | 52.41K |
| 41 | cut-extrude2_5_.prt.1 | 52.42K |
| 42 | cut-extrude2_6_.prt.1 | 62.68K |
| 43 | door_assem.asm.1 | 56.61K |
| 44 | door_bolt.prt.1 | 209.58K |
| 45 | door_lock1.prt.1 | 98.79K |
| 46 | door_lock2.prt.1 | 83.67K |
| 47 | door_lock3.prt.1 | 71.20K |
| 48 | door_suport_assem.asm.1 | 57.17K |
| 49 | duct_1.asm.1 | 60.97K |
| 50 | duct_1_2.asm.1 | 61.30K |
| 51 | duct_1_3.asm.1 | 60.24K |
| 52 | duct_cover.prt.1 | 89.92K |
| 53 | duct_cover_2.prt.1 | 97.43K |
| 54 | duct_cover_3.prt.1 | 93.05K |
| 55 | duct_end.prt.1 | 55.76K |
| 56 | duct_end2.prt.1 | 56.25K |
| 57 | duct_fixation.prt.1 | 74.20K |
| 58 | duct_l2.prt.1 | 105.62K |
| 59 | duct_l2_2.prt.1 | 114.97K |
| 60 | duct_l2_3.prt.1 | 115.50K |
| 61 | duct_l_link_2.prt.1 | 78.77K |
| 62 | empeller_guide.prt.1 | 81.99K |
| 63 | empler.asm.1 | 85.46K |
| 64 | empler_base_flange_n1.prt.1 | 234.99K |
| 65 | empler_base_flange_n1_2.prt.1 | 219.36K |
| 66 | empler_coupling.prt.1 | 105.36K |
| 67 | face_cover.asm.1 | 56.89K |
| 68 | face_cover2.prt.1 | 122.21K |
| 69 | face_side_mirror.prt.1 | 117.93K |
| 70 | face_side_mirror_dm.prt.1 | 109.56K |
| 71 | face_side_mirror_mirror.prt.1 | 109.25K |
| 72 | face_side_mirror_mm.prt.1 | 111.87K |
| 73 | fan.prt.1 | 117.22K |
| 74 | fillet1.prt.1 | 72.57K |
| 75 | fillet3.prt.1 | 440.49K |
| 76 | furnace.asm.1 | 61.76K |
| 77 | furnace.STEP | 42.49M |
| 78 | furnace_1.asm.1 | 74.53K |
| 79 | furnace_chassy.asm.1 | 129.47K |
| 80 | furnace_platform.asm.1 | 92.53K |
| 81 | hand.prt.1 | 80.87K |
| 82 | hex_bolt_gradeab_iso_iso-388752.prt.1 | 78.07K |
| 83 | hex_bolt_gradeab_iso_iso-409785.prt.1 | 78.36K |
| 84 | hex_bolt_gradeab_iso_iso_-36854.prt.1 | 79.13K |
| 85 | hex_flange_nut_gradea_iso_iso_-.prt.1 | 114.87K |
| 86 | hex_screw_gradec_iso_iso_4018_-.prt.1 | 80.89K |
| 87 | hex_structural_bolt_gradec_shor.prt.1 | 76.33K |
| 88 | hinj1.prt.1 | 69.85K |
| 89 | hinj2.prt.1 | 113.22K |
| 90 | hinj2_2.prt.1 | 100.67K |
| 91 | hinj_assem.asm.1 | 61.94K |
| 92 | hinj_assem_2.asm.1 | 62.17K |
| 93 | hinj_penz.prt.1 | 70.01K |
| 94 | idler_drum.prt.1 | 62.47K |
| 95 | imported1.prt.1 | 258.59K |
| 96 | isolation_part.prt.1 | 203.22K |
| 97 | isolation_part1_2.prt.1 | 79.52K |
| 98 | isolation_part2.prt.1 | 77.72K |
| 99 | isolation_part_cover.prt.1 | 127.43K |
| 100 | kiln_belt.prt.1 | 60.12K |
| 101 | kiln_belt_assem.asm.1 | 94.72K |
| 102 | kiln_belt_chassy1.prt.1 | 144.22K |
| 103 | kiln_belt_chassy2.prt.1 | 95.31K |
| 104 | kiln_belt_drum.prt.1 | 82.21K |
| 105 | kiln_belt_drum_2.prt.1 | 76.82K |
| 106 | kiln_belt_part1.prt.1 | 141.05K |
| 107 | kiln_belt_part1_2.prt.1 | 139.81K |
| 108 | kiln_belt_roller.prt.1 | 69.78K |
| 109 | lighter_base.prt.1 | 91.14K |
| 110 | link_corner_2_2.prt.1 | 84.97K |
| 111 | mancal_f207.asm.1 | 64.45K |
| 112 | mancal_f207_stp_1_.prt.1 | 67.25K |
| 113 | mancal_f207_stp_2_.prt.1 | 76.87K |
| 114 | mancal_f207_stp_3_.prt.1 | 345.72K |
| 115 | middle_panel_1.prt.1 | 371.48K |
| 116 | middle_panel_1_2.prt.1 | 354.10K |
| 117 | middle_panel_1_3.prt.1 | 357.56K |
| 118 | middle_panel_2.prt.1 | 170.30K |
| 119 | middle_panel_2_2.prt.1 | 150.81K |
| 120 | middle_panel_2_3.prt.1 | 154.62K |
| 121 | middle_panel_assem.asm.1 | 58.03K |
| 122 | middle_panel_assem_2.asm.1 | 55.95K |
| 123 | middle_panel_assem_3.asm.1 | 56.13K |
| 124 | middle_part.prt.1 | 131.33K |
| 125 | mid_part.prt.1 | 177.17K |
| 126 | mid_plate.prt.1 | 157.29K |
| 127 | motore_1hp.prt.1 | 2.83M |
| 128 | motor_fix0_2.prt.1 | 70.87K |
| 129 | motor_fix1.prt.1 | 99.54K |
| 130 | motor_fix2.prt.1 | 68.98K |
| 131 | motor_fix3.prt.1 | 78.19K |
| 132 | motor_fixation_assem.asm.1 | 66.10K |
| 133 | motor_fix_spacer.prt.1 | 84.68K |
| 134 | motor_holder_assem.asm.1 | 66.64K |
| 135 | motor_mount2.prt.1 | 132.11K |
| 136 | motor_mount3.prt.1 | 133.79K |
| 137 | motor_mount4.prt.1 | 68.70K |
| 138 | motor_u.prt.1 | 98.70K |
| 139 | new_body.asm.1 | 167.33K |
| 140 | new_chass_burner.asm.1 | 127.61K |
| 141 | oven_belt.prt.1 | 61.56K |
| 142 | oven_belt_assem.asm.1 | 122.30K |
| 143 | oven_belt_drum.prt.1 | 82.70K |
| 144 | oven_belt_drum_2.prt.1 | 78.38K |
| 145 | oven_belt_part1.prt.1 | 136.75K |
| 146 | oven_belt_part1_2.prt.1 | 143.02K |
| 147 | part1.prt.1 | 65.74K |
| 148 | part3.prt.1 | 61.96K |
| 149 | pent_holder_plate_3.prt.1 | 66.33K |
| 150 | pent_house.prt.1 | 322.04K |
| 151 | pent_house_assem.asm.1 | 97.40K |
| 152 | pent_house_assem_3.asm.1 | 97.40K |
| 153 | pent_house_face.prt.1 | 90.48K |
| 154 | pent_house_no_holes.prt.1 | 140.75K |
| 155 | pent_house_side.prt.1 | 300.25K |
| 156 | pent_house_side_closed_side.prt.1 | 296.86K |
| 157 | plade.prt.1 | 70.44K |
| 158 | plower_holder21.prt.1 | 123.20K |
| 159 | plower_holder22.prt.1 | 79.64K |
| 160 | plower_holder_support.prt.1 | 120.12K |
| 161 | pulley.prt.1 | 71.41K |
| 162 | rectangular_tube_iso_50_-166813.prt.1 | 70.04K |
| 163 | rectangular_tube_iso_50_x_-6285.prt.1 | 66.33K |
| 164 | roof.asm.1 | 72.24K |
| 165 | short_pitch_roller_chain-235980.prt.1 | 155.37K |
| 166 | short_pitch_roller_chain-381681.prt.1 | 262.99K |
| 167 | short_pitch_roller_chain-405420.prt.1 | 156.87K |
| 168 | short_pitch_roller_chain_-50835.prt.1 | 157.08K |
| 169 | short_pitch_roller_chain_-52585.prt.1 | 459.84K |
| 170 | side_cover.prt.1 | 240.85K |
| 171 | side_cover2.prt.1 | 84.21K |
| 172 | side_door.prt.1 | 105.99K |
| 173 | side_door2.prt.1 | 84.64K |
| 174 | side_door3.prt.1 | 133.43K |
| 175 | side_door_support_1.prt.1 | 111.43K |
| 176 | side_door_support_1_2.prt.1 | 89.28K |
| 177 | side_door_support_1_3.prt.1 | 65.09K |
| 178 | side_link.prt.1 | 129.83K |
| 179 | side_panel_1.prt.1 | 350.35K |
| 180 | side_panel_1_2.prt.1 | 369.58K |
| 181 | side_panel_2.prt.1 | 175.45K |
| 182 | side_panel_2_2.prt.1 | 195.92K |
| 183 | side_panel_assem.asm.1 | 54.84K |
| 184 | side_panel_assem_2.asm.1 | 58.88K |
| 185 | socket_head_cap_screw_iso_iso_4.prt.1 | 78.01K |
| 186 | square_tube_iso_50_x_50_-181614.prt.1 | 69.21K |
| 187 | square_tube_iso_50_x_50_-369380.prt.1 | 64.90K |
| 188 | square_tube_iso_50_x_50_x_5_0x4.prt.1 | 68.21K |
| 189 | square_tube_iso_50_x_50_x_5_0x9.prt.1 | 66.64K |
| 190 | ss_tube_2_5x5.prt.1 | 63.00K |
| 191 | ss_tube_5x5.prt.1 | 56.47K |
| 192 | support1.prt.1 | 54.32K |
| 193 | support_bar.prt.1 | 55.39K |
| 194 | tension_nut.prt.1 | 74.92K |
| 195 | tension_part1.prt.1 | 62.86K |
| 196 | tension_part2.prt.1 | 74.99K |
| 197 | top_link.prt.1 | 139.61K |
| 198 | top_panel_1.prt.1 | 382.27K |
| 199 | top_panel_1_2.prt.1 | 372.03K |
| 200 | top_panel_2_2.prt.1 | 165.83K |
| 201 | top_panel_2_default.prt.1 | 177.90K |
| 202 | top_panel_assem.asm.1 | 54.38K |
| 203 | top_panel_assem_2.asm.1 | 54.15K |
| 204 | uct-207.prt.1 | 249.85K |
| 205 | wheel.prt.1 | 87.23K |
| 206 | wheel_plate_2.prt.1 | 72.94K |
| 207 | 工业烘炉烘焙炉窑烘干室cero5.0.JPG | 448.30K |
此图纸下载需要7金币
立即下载
发布者
攘外必先安内。
创作: 76453
粉丝: 864
加入时间：2021-05-06
模型信息
图纸格式：step
文件大小：73.73M
所需金币：7
上传时间：2022-09-05 22:57:30
是否可编辑：可修改，包括参数
版本：PROE
标签
图纸简介
版权说明
用户在本站上传的作品如侵犯到您的权益，请与本站管理员联系删除。用户在本站下载的原创作品，只拥有作品的使用权，著作权归原作者所有，未经合法授权，用户不得以任何形式发布、传播、复制、转售该作品。
0.png)
0.png)
0_0_364.png)
0.png)
0.png)
0.png)
0_0_364.png)
0.jpg)
0.png)
0.png)
0.png)
0.jpg)
0.png)
0.png)
0_0_364.png)
0.png)
0.jpg)
0.png)
QQ在线客服
官方QQ群
