刀架支架_SOLIDWORKS 2018_模型图纸下载

首页

图库

AI工具

精选提词类型根据需求 · 提示更精准

文图生图图片渲染手办漫画线稿上色水印移除等距3D 画质提升证件照

🎨

AI绘图

灵感提示 · 极速出图

🤖

AI模型

灵感提示 · 极速生成

💡

创作广场

灵感分享 · 作品展示

🧩

格式转换

多格式互转 · 稳定高效

📚

课程学习

精选教程 · 边学边练

刀架支架（ID:334579）

机械设备 / 钢结构支架 / 刀架支架

©非原创

平面图

3D视图

文件列表

截图

AI截图渲染

✨AI图片渲染

#	文件名称	文件大小
1	.202 OD reamer holder.SLDPRT	117.35K
2	.202 reamer o-ring AS568 - 103.SLDPRT	184.54K
3	.223 1 in 7 twist rifling button, .227 grooves rifling .2202 land reaming.SLDPRT	143.97K
4	.281 gundrill base.SLDPRT	91.35K
5	.308 1 in 10 twist rifling button, .3132 grooves rifling .3012 land reaming.SLDPRT	146.22K
6	.75 inch male to male fitting.SLDPRT	656.10K
7	16634736947390.zip	16.11M
8	223 button and rod, 1 in 7 twist, .2278 rifler button, .2202 groove button, 30 inch rod.SLDASM	64.30K
9	223 button pull rod, .208 inch.SLDPRT	56.33K
10	223 finishing reamer assembly, and .75 attachment.SLDASM	190.02K
11	223 finishing reamer assembly.SLDASM	67.09K
12	223 finishing reamer toolpost assembly.SLDASM	705.16K
13	223 gundrill assembly.SLDASM	66.20K
14	223 gundrill head, .213 inch.SLDPRT	91.45K
15	223 gundrill shank, .198 inch OD, .152 inch ID.SLDPRT	126.53K
16	223 gundrill toolpost assembly.SLDASM	592.15K
17	223 gundrill-, reamerbase, .199 inch.SLDPRT	89.38K
18	223 pull reamer, .217 inch, 5 degree rake angle, 1 64th land, 13 degree relief angle.SLDPRT	222.05K
19	223 pull reamer, .2195 inch, 5 degree rake angle, 1 64th land, 13 degree relief angle.SLDPRT	226.08K
20	223 reamer rod, .200 OD, .120 ID.SLDPRT	39.11K
21	223 reamer rod, .202 OD, .120 ID.SLDPRT	38.51K
22	223 Remington pull rifling button, 30 inch rod.SLDASM	379.76K
23	223 Rifling button pull rod.SLDPRT	424.47K
24	223 rifling button, 2,5 degree incline angle, 4,5 degree decline angle, 5 degree brazing angle, .2278 inch rifler button, .2202 inch bore button.SLDPRT	185.20K
25	223 roughin reamer toolpost assembly.SLDASM	706.71K
26	223 roughing reamer assembly, and .75 attachment.SLDASM	190.06K
27	223 roughing reamer assembly.SLDASM	67.97K
28	308 button and rod, 1 in 10 twist, .3132 rifler button, .3012 groove button, 30 inch rod.SLDASM	68.89K
29	308 button pull rod, .290 inch.SLDPRT	56.93K
30	308 finishing reamer 2nd design toolpost assembly.SLDASM	785.20K
31	308 finishing reamer on 6mm, 2mm thick walled tube.SLDASM	292.09K
32	308 finishing reamer toolpost assembly.SLDASM	801.61K
33	308 gundrill assembly.SLDASM	68.30K
34	308 gundrill head.SLDPRT	86.54K
35	308 gundrill shank .281inch.SLDPRT	130.50K
36	308 gundrill toolpost assembly.SLDASM	581.53K
37	308 gundrill-, reamerbase, .282 inch.SLDPRT	88.66K
38	308 pull reamer, .298 inch, 5 degree rake angle, 15 704th land, 13 degree relief angle.SLDPRT	216.46K
39	308 pull reamer, .3005 inch, 5 degree rake angle, 15 704th land, 13 degree relief angle.SLDPRT	236.26K
40	308 reamer pull rod.SLDPRT	43.65K
41	308 reamer rod, .277 OD, .157 ID.SLDPRT	40.17K
42	308 reamer, .3005 inch, 6mm pipe, 2mm thick wall, 1mm thick wall on the last 2 inch..SLDASM	60.45K
43	308 rifling button, 1 in 10 twist, 2,5 degree incline angle, 4,5 degree decline angle, 5 degree brazing angle, .3132 inch rifler button, .3012 inch bore button,.SLDPRT	173.39K
44	308 roughin reamer toolpost assembly.SLDASM	803.87K
45	308 roughing reamer on 6mm, 2mm thick walled tube.SLDASM	291.05K
46	308 winchester pull rifling button, 30 inch rod.SLDASM	297.96K
47	308 winchester, 6mm shaft, reamer, gundrill-, reamerbase.SLDPRT	79.59K
48	308, .298 inch Reamer 60 degree flutes, 5 degree rake angle.SLDPRT	218.09K
49	308, .3005 inch Reamer 60 degree flutes, 5 degree rake angle.SLDPRT	224.07K
50	6mm, 1mm thick wall 30 inch tube.SLDPRT	39.00K
51	6mm, 2mm thick wall 30 inch tube, last 2 inch 1mm thick wall.SLDPRT	44.42K
52	6mm, 2mm thick wall, reamer holder template.SLDPRT	109.71K
53	AS568 - 016.sldprt	127.19K
54	Barrel Finishing Reamer, 308 Winchester, based on Harrold Hoffman, the modern gunsmith, and machinery handbook 27th edition chapter reamers.SLDPRT	217.82K
55	Barrel Reamer, based on Harrold Hoffman, the modern gunsmith, and machinery handbook 27th edition chapter reamers.SLDPRT	197.68K
56	Barrel Roughing Reamer, 308 Winchester, based on Harrold Hoffman, the modern gunsmith, and machinery handbook 27th edition chapter reamers.SLDPRT	219.90K
57	copy 1, 223 pull reamer, .217 inch, 5 degree rake angle, 1 64th land, 13 degree relief angle.SLDPRT	216.22K
58	copy 1, 308 pull reamer, .298 inch, 5 degree rake angle, 15 704th land, 13 degree relief angle.SLDPRT	217.24K
59	copy 223 pull reamer, .217 inch, 5 degree rake angle, 1 64th land, 13 degree relief angle.SLDPRT	215.30K
60	copy 223 pull reamer, .2195 inch, 5 degree rake angle, 1 64th land, 13 degree relief angle.SLDPRT	227.32K
61	copy 308 pull reamer, .298 inch, 5 degree rake angle, 15 704th land, 13 degree relief angle.SLDPRT	217.70K
62	copy 308 pull reamer, .3005 inch, 5 degree rake angle, 15 704th land, 13 degree relief angle.SLDPRT	235.57K
63	fig. 61 page 129 30 caliber barrel drill.SLDPRT	73.77K
64	fig. 61 page 129 30 caliber gundrill.SLDASM	80.84K
65	fig. 61 page 129 elevation of hose and oil tube connection.SLDPRT	97.35K
66	fig. 61 page 129 elevation of oil tube.SLDPRT	130.41K
67	gundrill and reamer toolpost holder template.SLDASM	575.32K
68	gundrill-, reamerbase.SLDPRT	73.48K
69	gundrill-, reamerholder, with .75 inch thread for quick connector adapter.SLDPRT	132.01K
70	HBOLT 0.2500-20x0.5x0.5-S.sldprt	178.12K
71	HHBOLT 0.5000-13x1x1-S.sldprt	181.46K
72	O-ring 2.24x1.8-A-ISO 3601-1.sldprt	244.43K
73	Reamer 60 degree flutes, 5 degree rake angle.SLDPRT	155.60K
74	reamer holder template.SLDPRT	90.11K
75	Rifling button pull rod.SLDPRT	336.86K
76	Rifling button shank.SLDPRT	328.79K