登录注册
微信扫码登录
Y2474-减速器 gear-reducer-18 inventor（ID:801421）
0.png)
1.png)
2.png)
3.png)
4.png)
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 17004625783405.zip | 29.78M |
| 2 | Gear_reducer.stl | 2.49M |
| 3 | Gear_reducer.zip | 29.09M |
| 4 | Debeli_lim_donji_prednji.ipt | 195.00K |
| 5 | Debeli_lim_donji_zadnji.ipt | 188.00K |
| 6 | Debeli_lim_gornji_prednji.ipt | 204.50K |
| 7 | Debeli_lim_gornji_zadnji.ipt | 202.00K |
| 8 | DIN3771-45x5.3-N-NBR70545.18.ipt | 142.50K |
| 9 | DIN3771-92.5x5.3-N-NBR70590.18.ipt | 135.00K |
| 10 | DIN6885-A20x12x63.ipt | 119.00K |
| 11 | DIN6885-B32x18x100.ipt | 112.00K |
| 12 | DIN6912-M10x20.ipt | 184.00K |
| 13 | DIN6912-M8x12.ipt | 185.00K |
| 14 | DIN7603-A16x20lt.ipt | 103.50K |
| 15 | DIN7603-A30x36lt.ipt | 103.00K |
| 16 | DIN908-M16x1.5.ipt | 184.50K |
| 17 | DIN908-M30x1.5.ipt | 189.00K |
| 18 | DINEN28736-8x30-StxDIN7978.ipt | 167.50K |
| 19 | DINENISO4762-M10x25.ipt | 188.00K |
| 20 | DINENISO4762-M20x110.ipt | 184.50K |
| 21 | dipstick.iam | 158.00K |
| 22 | Donji_lim_prednji.ipt | 271.50K |
| 23 | Donji_lim_savijanje.ipt | 204.50K |
| 24 | Donji_lim_zadnji.ipt | 275.50K |
| 25 | Gear_reducer.jpg | 70.92K |
| 26 | Gear_reducer_2.jpg | 60.56K |
| 27 | Gornji_lim.ipt | 279.00K |
| 28 | Gornji_poklopac.ipt | 153.00K |
| 29 | ISO355-2FD-60x130x48.5.ipt | 288.50K |
| 30 | ISO355-3FC-90x160x42.5.ipt | 325.50K |
| 31 | ISO355-5FD-45x100x38.25.ipt | 318.00K |
| 32 | Lim_za_ispust.ipt | 128.50K |
| 33 | Lim_za_provjeru.ipt | 123.50K |
| 34 | mjera.ipt | 91.00K |
| 35 | Nazubljeno_vratilo_B.iam | 199.50K |
| 36 | Nosac_dodatni_manji_dio.ipt | 172.00K |
| 37 | Nosac_donji_veci_dio.ipt | 180.50K |
| 38 | Nosac_gornji_dodatni_manji_dio.ipt | 178.50K |
| 39 | Nosac_gornji_veci_dio.ipt | 187.50K |
| 40 | Nosivi_lim.ipt | 134.50K |
| 41 | Nosivi_lim_desni.ipt | 134.50K |
| 42 | novi_gornji.ipt | 304.00K |
| 43 | packngo.log | 13.19K |
| 44 | Podupirac_A.ipt | 130.50K |
| 45 | Podupirac_A_zadnji.ipt | 128.50K |
| 46 | Podupirac_B.ipt | 119.50K |
| 47 | poklopac.ipt | 144.00K |
| 48 | Poklopac_A.ipt | 188.00K |
| 49 | Poklopac_A_otvor.ipt | 211.50K |
| 50 | Poklopac_B.ipt | 203.50K |
| 51 | Poklopac_C.ipt | 185.50K |
| 52 | Poklopac_C_otvor.ipt | 207.00K |
| 53 | Poklopac_desni.ipt | 123.50K |
| 54 | Poklopac_lijevi.ipt | 127.50K |
| 55 | seal.ipt | 146.50K |
| 56 | Vratilo_1.ipt | 218.00K |
| 57 | Vratilo_2.iam | 181.00K |
| 58 | Vratilo_2.ipt | 194.00K |
| 59 | Vratilo_3.ipt | 175.00K |
| 60 | Zavreni_donji_dio.iam | 1.18M |
| 61 | Zavreni_gornji_dio.iam | 721.50K |
| 62 | Zupcanik_A.ipt | 1.12M |
| 63 | Zupcanik_B.ipt | 482.50K |
| 64 | Zupcanik_C.ipt | 1.19M |
| 65 | Zupcanik_D.ipt | 504.00K |
| 66 | Zvareno_spojeno.iam | 1.78M |
| 67 | Zvareno_spojeno.ipj | 10.10K |
| 68 | Zvareno_spojeno.ipj.old | 9.63K |
| 69 | balloon.xml | 65.90K |
| 70 | centermark.xml | 11.20K |
| 71 | datumtarget.xml | 31.55K |
| 72 | dimension.xml | 3.55M |
| 73 | externalmaterialmapping.xml | 23.05K |
| 74 | featureautoname.xml | 17.05K |
| 75 | featurecontrolframe.xml | 62.80K |
| 76 | hatch.xml | 7.37K |
| 77 | holetable.xml | 1.44M |
| 78 | id.xml | 72.07K |
| 79 | layers.xml | 166.39K |
| 80 | leader.xml | 67.10K |
| 81 | lighting.xml | 64.46K |
| 82 | materialmapping.xml | 202.29K |
| 83 | objectdefaults.xml | 551.60K |
| 84 | partslist.xml | 351.39K |
| 85 | propertymap.xml | 14.21K |
| 86 | proteinmapping.xml | 643.30K |
| 87 | realisticallowedcommands.xml | 29.36K |
| 88 | revisiontable.xml | 107.99K |
| 89 | sheetmetalrules.xml | 6.66K |
| 90 | sheetmetalunfold.xml | 6.18K |
| 91 | standard.xml | 354.54K |
| 92 | studioimagebasedlighting.xml | 14.03K |
| 93 | studiolighting.xml | 52.48K |
| 94 | studioscene.xml | 23.04K |
| 95 | surfacetexture.xml | 52.17K |
| 96 | table.xml | 39.67K |
| 97 | Template.config | 116B |
| 98 | text.xml | 43.47K |
| 99 | viewannotation.xml | 29.53K |
| 100 | weld.xml | 71.21K |
| 101 | weldbead.xml | 14.53K |
| 102 | moldbase.xml | 112.90K |
| 103 | molddesignstoppin.ipt | 105.00K |
| 104 | CableHarnessDefaultLibrary.iwl | 411.91K |
| 105 | harness.iam | 79.00K |
| 106 | exportdwg.ini | 1.01K |
| 107 | exportdxf.ini | 1.01K |
| 108 | FaceLoops.xml | 6.31K |
| 109 | FlatPattern.xml | 7.66K |
| 110 | FlatPatternExportOpts.xml | 1.63K |
| 111 | importacad.ini | 994B |
| 112 | importdxf.ini | 986B |
| 113 | importmdt.ini | 990B |
| 114 | Defaults.ini | 3.73K |
| 115 | MaterialsFavorites.xml | 4.51K |
| 116 | PartsListGroup1.xls | 65.50K |
| 117 | PartsListGroup1b.xls | 71.50K |
| 118 | PartsListTemplate.xls | 55.00K |
| 119 | WeldFavorites.ini | 988B |
| 120 | Assemblydrawings.tr | 2.76K |
| 121 | Coldpunchingparts.tr | 1.54K |
| 122 | Electricalcases.tr | 2.13K |
| 123 | Forgedparts.tr | 1.52K |
| 124 | Mechanicalparts.tr | 2.12K |
| 125 | Moldparts.tr | 2.51K |
| 126 | Pipes.tr | 1.17K |
| 127 | Steelmoldparts.tr | 2.04K |
| 128 | Surfacecoatings.tr | 384B |
| 129 | Weldassemblies.tr | 1.13K |
| 130 | Assemblydrawings.tr | 2.76K |
| 131 | Coldpunchingparts.tr | 1.54K |
| 132 | Electricalcases.tr | 2.13K |
| 133 | Forgedparts.tr | 1.52K |
| 134 | Mechanicalparts.tr | 2.12K |
| 135 | Moldparts.tr | 2.51K |
| 136 | Pipes.tr | 1.17K |
| 137 | Steelmoldparts.tr | 2.04K |
| 138 | Surfacecoatings.tr | 384B |
| 139 | Weldassemblies.tr | 1.13K |
| 140 | PropertyMap_Catia.xml | 4.51K |
| 141 | PropertyMap_Creo.xml | 4.38K |
| 142 | PropertyMap_Fusion.xml | 3.61K |
| 143 | PropertyMap_NX.xml | 4.48K |
| 144 | PropertyMap_SolidEdge.xml | 3.79K |
| 145 | PropertyMap_STEP.xml | 3.76K |
| 146 | PropertyMap_SW.xml | 5.03K |
| 147 | InventorMaterialLibrary-chs.xlf | 893.10K |
| 148 | InventorMaterialLibrary-cht.xlf | 892.15K |
| 149 | InventorMaterialLibrary-csy.xlf | 933.75K |
| 150 | InventorMaterialLibrary-deu.xlf | 925.76K |
| 151 | InventorMaterialLibrary-eng.xlf | 902.41K |
| 152 | InventorMaterialLibrary-esp.xlf | 927.78K |
| 153 | InventorMaterialLibrary-fra.xlf | 927.76K |
| 154 | InventorMaterialLibrary-hun.xlf | 929.61K |
| 155 | InventorMaterialLibrary-ita.xlf | 935.23K |
| 156 | InventorMaterialLibrary-jpn.xlf | 950.65K |
| 157 | InventorMaterialLibrary-kor.xlf | 922.72K |
| 158 | InventorMaterialLibrary-plk.xlf | 939.75K |
| 159 | InventorMaterialLibrary-ptb.xlf | 925.27K |
| 160 | InventorMaterialLibrary-rus.xlf | 1.05M |
| 161 | InventorMaterialLibrary.adsklib | 152.06K |
| 162 | GraphicsUI.xml | 1.88K |
| 163 | PhysMatUI.xml | 3.01K |
| 164 | CommonSchema.xml | 2.26K |
| 165 | PhysMatSchema.xml | 3.33K |
| 166 | StructuralCommonSchema.xml | 1.71K |
| 167 | StructuralConcreteSchema.xml | 1.16K |
| 168 | StructuralGenericSchema.xml | 616B |
| 169 | StructuralMetalSchema.xml | 723B |
| 170 | StructuralPlasticSchema.xml | 616B |
| 171 | StructuralWoodSchema.xml | 2.96K |
| 172 | ThermalCommonSchema.xml | 1.94K |
| 173 | ThermalGasSchema.xml | 1003B |
| 174 | ThermalLiquidSchema.xml | 1.47K |
| 175 | ThermalSolidSchema.xml | 2.57K |
| 176 | BasicStructuralUI.xml | 1.55K |
| 177 | ConcreteStructuralUI.xml | 12.46K |
| 178 | FatigueStructuralUI.xml | 4.51K |
| 179 | GasStructuralUI.xml | 1.81K |
| 180 | GenericStructuralUI.xml | 12.03K |
| 181 | MetalStructuralUI.xml | 12.16K |
| 182 | PlasticStructuralUI.xml | 12.05K |
| 183 | WoodStructuralUI.xml | 14.29K |
| 184 | GasThermalUI.xml | 2.16K |
| 185 | LiquidThermalUI.xml | 2.62K |
| 186 | SolidThermalUI.xml | 4.12K |
| 187 | Autodesk_Logo_Black.png | 4.79K |
| 188 | Configuration.htm | 32.61K |
| 189 | Constraint.htm | 744B |
| 190 | Contact.htm | 328B |
| 191 | Figure.htm | 444B |
| 192 | Load.htm | 724B |
| 193 | Main.htm | 5.40K |
| 194 | Material.htm | 1.05K |
| 195 | minus.png | 167B |
| 196 | plus.png | 172B |
| 197 | ReactionForces.htm | 311B |
| 198 | Shell.htm | 324B |
| 199 | Simulation.htm | 3.48K |
| 200 | pipingruns.iam | 261.50K |
| 201 | clearance.xls | 122.50K |
| 202 | thread.xls | 1.67M |
| 203 | Zvareno_spojeno.ipj.bak | 10.10K |
| 204 | Zvareno_spojeno.ipj.old.bak | 9.63K |
| 205 | Blank-DVRCarousel.pdf | 53.26K |
| 206 | Blank.pdf | 30.64K |
| 207 | SampleAssemblyTemplate.pdf | 967.01K |
| 208 | SamplePartTemplate.pdf | 55.77K |
| 209 | SheetMetal.ipt | 77.50K |
| 210 | Standard.dwg | 171.01K |
| 211 | Standard.iam | 67.50K |
| 212 | Standard.idw | 172.50K |
| 213 | Standard.ipn | 34.50K |
| 214 | Standard.ipt | 70.00K |
| 215 | Weldment.iam | 189.50K |
| 216 | Blank-DVRCarousel.pdf | 53.26K |
| 217 | Blank.pdf | 30.64K |
| 218 | SampleAssemblyTemplate.pdf | 967.01K |
| 219 | SamplePartTemplate.pdf | 55.77K |
| 220 | SheetMetal.ipt | 77.50K |
| 221 | Standard.dwg | 171.01K |
| 222 | Standard.iam | 67.50K |
| 223 | Standard.idw | 172.50K |
| 224 | Standard.ipn | 34.50K |
| 225 | Standard.ipt | 70.00K |
| 226 | Weldment.iam | 189.50K |
| 227 | am_ansi.dwg | 263.63K |
| 228 | ANSIin.dwg | 171.01K |
| 229 | ANSIin.idw | 172.50K |
| 230 | MoldDesignin.iam | 67.50K |
| 231 | SheetMetalin.ipt | 77.50K |
| 232 | Standardin.iam | 67.50K |
| 233 | Standardin.ipn | 34.50K |
| 234 | Standardin.ipt | 70.00K |
| 235 | WeldmentANSI.iam | 189.50K |
| 236 | am_bsi.dwg | 289.28K |
| 237 | am_din.dwg | 331.13K |
| 238 | am_gb.dwg | 303.97K |
| 239 | am_iso.dwg | 300.03K |
| 240 | am_jis.dwg | 285.31K |
| 241 | ANSImm.dwg | 169.10K |
| 242 | ANSImm.idw | 161.50K |
| 243 | BSI.dwg | 113.94K |
| 244 | BSI.idw | 109.50K |
| 245 | DIN.dwg | 125.18K |
| 246 | DIN.idw | 121.00K |
| 247 | GB.dwg | 165.63K |
| 248 | GB.idw | 156.50K |
| 249 | GOST.dwg | 287.28K |
| 250 | GOST.idw | 287.50K |
| 251 | ISO.dwg | 115.65K |
| 252 | ISO.idw | 111.00K |
| 253 | JIS.dwg | 115.28K |
| 254 | JIS.idw | 110.00K |
| 255 | MoldDesignDIN.iam | 67.00K |
| 256 | MoldDesignmm.iam | 67.00K |
| 257 | SheetMetalDIN.ipt | 75.00K |
| 258 | SheetMetalmm.ipt | 75.50K |
| 259 | StandardDIN.iam | 67.50K |
| 260 | StandardDIN.ipn | 34.50K |
| 261 | StandardDIN.ipt | 70.00K |
| 262 | Standardmm.iam | 75.00K |
| 263 | Standardmm.ipn | 34.50K |
| 264 | Standardmm.ipt | 70.00K |
| 265 | WeldmentANSI-mm.iam | 189.50K |
| 266 | WeldmentBSI.iam | 189.50K |
| 267 | WeldmentDIN.iam | 189.50K |
| 268 | WeldmentGB.iam | 189.50K |
| 269 | WeldmentISO.iam | 189.50K |
| 270 | WeldmentJIS.iam | 189.50K |
| 271 | MoldDesign.iam | 67.50K |
| 272 | am_ansi.dwg | 263.63K |
| 273 | ANSIin.dwg | 171.01K |
| 274 | ANSIin.idw | 172.50K |
| 275 | MoldDesignin.iam | 67.50K |
| 276 | SheetMetalin.ipt | 77.50K |
| 277 | Standardin.iam | 67.50K |
| 278 | Standardin.ipn | 34.50K |
| 279 | Standardin.ipt | 70.00K |
| 280 | WeldmentANSI.iam | 189.50K |
| 281 | am_bsi.dwg | 289.28K |
| 282 | am_din.dwg | 331.13K |
| 283 | am_gb.dwg | 303.97K |
| 284 | am_iso.dwg | 300.03K |
| 285 | am_jis.dwg | 285.31K |
| 286 | ANSImm.dwg | 169.10K |
| 287 | ANSImm.idw | 161.50K |
| 288 | BSI.dwg | 113.94K |
| 289 | BSI.idw | 109.50K |
| 290 | DIN.dwg | 125.18K |
| 291 | DIN.idw | 121.00K |
| 292 | GB.dwg | 165.63K |
| 293 | GB.idw | 156.50K |
| 294 | GOST.dwg | 287.28K |
| 295 | GOST.idw | 287.50K |
| 296 | ISO.dwg | 115.65K |
| 297 | ISO.idw | 111.00K |
| 298 | JIS.dwg | 115.28K |
| 299 | JIS.idw | 110.00K |
| 300 | MoldDesignDIN.iam | 67.00K |
| 301 | MoldDesignmm.iam | 67.00K |
| 302 | SheetMetalDIN.ipt | 75.00K |
| 303 | SheetMetalmm.ipt | 75.50K |
| 304 | StandardDIN.iam | 67.50K |
| 305 | StandardDIN.ipn | 34.50K |
| 306 | StandardDIN.ipt | 70.00K |
| 307 | Standardmm.iam | 75.00K |
| 308 | Standardmm.ipn | 34.50K |
| 309 | Standardmm.ipt | 70.00K |
| 310 | WeldmentANSI-mm.iam | 189.50K |
| 311 | WeldmentBSI.iam | 189.50K |
| 312 | WeldmentDIN.iam | 189.50K |
| 313 | WeldmentGB.iam | 189.50K |
| 314 | WeldmentISO.iam | 189.50K |
| 315 | WeldmentJIS.iam | 189.50K |
| 316 | MoldDesign.iam | 67.50K |
此图纸下载需要10金币
立即下载
发布者
高贵的手链
创作: 13741
粉丝: 132
加入时间：2023-10-25
模型信息
图纸格式：stl,ipt,iam,pdf,dwg
文件大小：30.49M
所需金币：10
上传时间：2023-11-20 14:43:10
是否可编辑：可修改，包括参数
版本：Inventor
标签
图纸简介
版权说明
用户在本站上传的作品如侵犯到您的权益，请与本站管理员联系删除。用户在本站下载的原创作品，只拥有作品的使用权，著作权归原作者所有，未经合法授权，用户不得以任何形式发布、传播、复制、转售该作品。
作者其它图纸 查看更多
0.png)
0.png)
0.png)
0.png)
0.png)
0.png)
0.png)
0_0_364.png)
0.png)
0.png)
0.png)
0.png)
0.png)
0.png)
QQ在线客服
官方QQ群
